- Incorrect roll profiles can lead to bad double seams and non-compliance with double seam standards!
- Using a non-contact, laser based profiloscope – the inROLL is able to scan profiles of seaming Rolls and Chucks (or other tooling – including carbide and ceramic tools) easily and quickly. The system can be used for acceptance testing for new seaming rolls or chucks, for quality assurance purposes and for stress analysis.
- inROLL is the first dedicated computerized non-contact seaming Roll and Chuck gauge. By scanning the profile, it is capable of detecting defects, analyzing angles, radii, measuring distances and automatically measuring the differences between a roll’s specification and the current scan. This system replaces optical comparators, projectors and other techniques for comparing contour profiles for rolls, chucks and other tooling.
- Using a micrometric table, the operator can position practically any roll or chuck into view. Once positioned correctly, the operator captures the image and analyzes it against a given standard graph, which can be either a previously scanned image (the same tooling when it was brand new) or a CAD drawing.
- Zoom in and out of the profile
- Find any radius, angle or distance on the profile
- Export the profile to CAD or compare it with a CAD drawing
- Import a reference profile from a CAD drawing
- (including region of interest areas)
- View automatic measurements (compare it to the spec)
- Each standard can have “regions of interest”, which allows the operator to automatically measure radii and angles anywhere on the profile. The measurements can be integrated into reports and inspected for variations over time, both between different rolls and for the same roll at different measurement positions.
- For rolls, the system will automatically detect roll depth, height and length. For chucks, the systemautomatically measures the chuck width. Both first and second operation Rolls can be inspected easily. The system can print out 50x graphs (or other ratios) – which can be compared with the original drawings of the Roll. Finally, can makers will be able to inspect new Roll and Chuck profiles before placing them on the production line.
- Placing faulty Rolls or Chucks in the production line without inspection can produce faulty seams – which can stop production (or worse).
- Locate duplicate roll & chuck designs – reduce inventory
- Catalog rolls & chucks
- Acceptance testing for rolls and chucks – prevent mistakes in production!
- Monitor tooling wear to replace rolls and chucks only when they need to be replaced
- Isolate bad profile designs
- Compare design with manufacturing
- Reverse engineer tooling design
- Compare designs from different manufacturers
A-104, Umiya Park, Ashish Complex, C. S. Road No.4, Dahisar East, Mumbai, Maharashtra, 400068, India